A127f U7 Auto Patch Info

# 8. Verify SHA‑256 log "Verifying integrity …" CALC_SHA=$(sha256sum "$PATCH_FILE" | awk 'print $1') if [ "$CALC_SHA" != "$PATCH_SHA256" ]; then log "Checksum mismatch! Expected $PATCH_SHA256, got $CALC_SHA" rm -rf "$TMP_DIR" exit 1 fi log "Checksum OK."

"patch_version": $REMOTE_PATCH_VERSION, "applied_at": "$(date -u +"%Y-%m-%dT%H:%M:%SZ")"

# 1. Get current build id (e.g., "U7-20230915") CURRENT_BUILD=$(getprop ro.build.display.id 2>/dev/null) if [ -z "$CURRENT_BUILD" ]; then log "Cannot read current build id – aborting." exit 1 fi log "Current firmware: $CURRENT_BUILD"

# -------------------------------------------------------------- a127f u7 auto patch

if [ -z "$MANIFEST_JSON" ]; then log "Empty manifest – aborting." exit 1 fi

log() echo "[$LOG_TAG] $*"

It assumes you have root access (or a custom recovery such as TWRP) and that you are comfortable running a small shell script at boot. – Flashing or patching firmware can brick the device if something goes wrong. • Always keep a full backup (TWRP backup, Odin‑saved stock firmware, or a complete “nandroid” image). • Test the script on a spare device first. • Make sure the patch you are applying is exactly for the A127F U7 build (same region, carrier, and base‑band version). 1. High‑level flow | Step | What the script does | Why it matters | |------|----------------------|----------------| | A. Detect current build | Reads ro.build.display.id (or /system/build.prop ) to know the exact firmware version you’re on. | Prevents re‑applying an already‑installed patch. | | B. Query a remote “patch‑manifest” | HTTPS GET to a small JSON file you host (e.g., https://my‑patch‑server.com/a127f_u7/manifest.json ). | Central place to announce new patches, version numbers, and download URLs. | | C. Compare versions | If the manifest reports a newer patch_version than the one stored locally, the script proceeds. | Guarantees you only download when needed. | | D. Download the patch | Uses curl / wget to fetch a signed ZIP (or a fastboot‑compatible tar). | The patch file contains only the delta (difference) files, not a full ROM. | | E. Verify integrity | Checks the SHA‑256 hash (provided in the manifest) and optionally GPG‑signatures. | Prevents corrupted or malicious payloads. | | F. Apply the patch | • If it’s a TWRP‑flashable ZIP , the script calls twrp install . • If it’s a fastboot image, the script reboots to fastboot and runs fastboot flash … . | Handles the two most common Android flashing paths. | | G. Record success | Writes the new patch_version to /data/local/tmp/auto_patch_state.json (or another persistent location). | Guarantees the next run knows it’s up‑to‑date. | | H. Reboot | A clean reboot after flashing ensures the new binaries are loaded. | Prevents “partial‑flash” glitches. | 2. Minimal working example (Bash) Below is a complete, self‑contained script you can drop into /system/bin/auto‑patch.sh (or any location on the /data partition if you prefer). Make it executable ( chmod +755 ) and add it to /etc/init.d/99auto‑patch (or the equivalent init‑rc file for your Android version) so it runs on every boot. Get current build id (e

log "Auto‑patch process finished. Rebooting now…" reboot

log "New patch detected! Preparing to download…"

EOF

# 7. Download the patch log "Downloading patch from $PATCH_URL ..." if command -v curl >/dev/null 2>&1; then curl -fLo "$PATCH_FILE" "$PATCH_URL" elif command -v wget >/dev/null 2>&1; then wget -O "$PATCH_FILE" "$PATCH_URL" fi

# 10. Record success (this line runs only for the TWRP‑case *after* the device # comes back online; for fastboot it runs immediately after flashing) log "Patch $REMOTE_PATCH_VERSION applied successfully – persisting state." cat > "$STATE_FILE" <<EOF

#!/system/bin/sh # -------------------------------------------------------------- # auto‑patch.sh – Automatic patch installer for Samsung A127F (U7) # -------------------------------------------------------------- # Requirements: # * root (or a custom recovery with 'adb shell' access) # * curl or wget # * jq (JSON parser) – can be installed via Magisk modules or busybox # * TWRP (recommended) or fastboot access # -------------------------------------------------------------- • Test the script on a spare device first

# Tell TWRP what to do (via its command file) echo "--update_package=/cache/recovery/auto_patch.zip" > /cache/recovery/command

# 4. Parse manifest (requires jq) REMOTE_PATCH_VERSION=$(echo "$MANIFEST_JSON" | jq -r .patch_version) PATCH_URL=$(echo "$MANIFEST_JSON" | jq -r .patch_url) PATCH_SHA256=$(echo "$MANIFEST_JSON" | jq -r .patch_sha256) PATCH_TYPE=$(echo "$MANIFEST_JSON" | jq -r .patch_type) # "twrp_zip" or "fastboot"