Ch-899 Chouchin Radio Controlled Clock Manual 🎯

Is your clock currently stuck at a specific time, or is it just not picking up the signal at all?

This can take anywhere from 3 to 12 minutes. If it finds the signal, the hands will automatically fast-forward to the correct time. 2. Manual Setup (If the signal is weak)

Here is a quick guide to getting your CH-899 up and running. 1. The Initial Startup Insert Batteries: ch-899 chouchin radio controlled clock manual

Once the batteries are in, the hands will usually spin automatically to the 12:00, 4:00, or 8:00 position. Do not touch the hands.

Pressing this forces the clock to try searching for the radio signal again. Try placing the clock near a window facing towards the signal transmitter while doing this. Is your clock currently stuck at a specific

radio signals to stay accurate, the goal is to get it to "talk" to the tower.

If the hands don't move after 15 minutes, you might be in a "dead zone" (near thick stone walls or heavy electronics). M.SET Button: The Initial Startup Insert Batteries: Once the batteries

The clock is now in "receiving mode," searching for the radio signal.

If the clock is acting glitchy, use a paperclip to press the Reset hole. This clears the memory and starts the auto-sync process from scratch. 3. Tips for Success Night Sync:

Radio signals are strongest at night. If it doesn't set during the day, leave it by a window overnight; it usually corrects itself by 4:00 AM.

Open the back compartment and insert fresh AA batteries (alkaline is best). The Auto-Sync: