Evoko Liso Factory Reset -

Enter the Admin PIN (default is 0000 unless changed).

Confirm by selecting Yes .

With the device powered on, press and hold the reset button using your tool.

A confirmation prompt will appear. Read the warning, then tap Reset Device . Evoko Liso Factory Reset

Continue holding for 15–20 seconds until the screen goes dark and the LED indicator blinks rapidly.

The panel will reboot after 2–3 minutes. Upon restart, you will see the initial setup wizard . Method 2: Hardware Factory Reset (For Unresponsive Devices) Use this method if the touchscreen is frozen, stuck on a boot loop, or you cannot access the settings menu.

Select Factory Data Reset .

On the Evoko Liso home screen, tap the gear icon (Settings) in the bottom-right corner.

Locate the reset pinhole on the back or bottom edge of the Evoko Liso unit.

Release the button. The device will power cycle and boot into recovery mode. Enter the Admin PIN (default is 0000 unless changed)

Navigate to System → Advanced → Reset Options .

In the recovery menu (text appears on screen), use the volume buttons to navigate to Wipe data/factory reset and press the power button to select it.