Hpe Msr954 Router Configuration Guide Apr 2026

[HPE-MSR954] acl advanced 3100 [HPE-MSR954-acl-ipv4-adv-3100] rule deny tcp source any destination any destination-port eq 22 [HPE-MSR954-acl-ipv4-adv-3100] rule permit tcp source 203.0.113.100 0 destination any destination-port eq 22 [HPE-MSR954] interface GigabitEthernet 0/0 [HPE-MSR954-GigabitEthernet0/0] packet-filter 3100 inbound [HPE-MSR954] undo http server enable [HPE-MSR954] undo telnet server enable 8. Save Configuration & Backup Always save after changes:

[HPE-MSR954] save The current configuration will be written to the device. Are you sure? [Y/N]:y hpe msr954 router configuration guide

<HPE-MSR954> tftp 192.168.1.200 get backup_msr954.cfg startup.cfg <HPE-MSR954> reboot | Command | Purpose | |---------|---------| | display ip interface brief | Show IP status of all interfaces | | display interface brief | Show link status | | display ip routing-table | View route table | | display nat session all | Active NAT translations | | display wlan client | Connected Wi-Fi clients | | display dhcp server ip-in-use | DHCP leases | | ping -a 192.168.1.1 8.8.8.8 | Source-ping from LAN IP | 10. Factory Reset (If Needed) <HPE-MSR954> bootrom update file reset.btw # not typical # Instead, during boot (Ctrl+B): =========================<EXTEND-BOOTROM>========================= | <1> Boot System | | <2> Restore to Factory Default Configuration | | <3> Skip Current Configuration | ================================================================= Press Ctrl+B now... select option 2. Or in CLI (if accessible): [Y/N]:y <HPE-MSR954> tftp 192

Assign Wi-Fi to VLAN 1 (or separate VLAN). 7.1 Packet Filter (ACL) Block SSH from WAN except specific IP: Or in CLI (if accessible): Assign Wi-Fi to

1. Overview & Prerequisites The HPE MSR954 is a compact, fixed-port router in the MSR900 series, running Comware V7 (HPE’s proprietary network OS). It is designed for small branches or enterprise edge routing.