Mks Gen V1.4 Klipper Official

cd ~/ cd klipper make menuconfig Set the following options exactly:

[stepper_x] step_pin: PF0 dir_pin: PF1 enable_pin: !PD7 microsteps: 16 rotation_distance: 40 endstop_pin: ^PE4 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] step_pin: PF2 dir_pin: PF3 enable_pin: !PD7 microsteps: 16 rotation_distance: 40 endstop_pin: ^PJ1 position_endstop: 0 position_max: 200 homing_speed: 50 mks gen v1.4 klipper

[mcu] serial: /dev/serial/by-id/usb-Arduino__www.arduino.cc__0043_... cd ~/ cd klipper make menuconfig Set the

[fan] pin: PH3

[printer] kinematics: cartesian max_velocity: 300 max_accel: 3000 max_z_velocity: 5 max_z_accel: 100 mks gen v1.4 klipper